Salmon Fishing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 21 Results
  1. General Board
    Gents, Please be nice and vote in the tie of the year competition. These guys have done a great job all year inspiring us. At least have a look and pick your favourite one. Cheers Mows
  2. General Board
    I have a couple of multiplier reels that need a good going over for next season. I have in the past used blakdog tackle and Russ does a great job. He is so busy that it's around a 6 week turnaround has anyone used any other reel service engineers ??
  3. General Board
    Ive just had a rod section repaired by Foxons of st Asaph for £32 including return postage and it looks an excellent job. Just a heads up for anyone wanting to try a repair before binning a well loved rod that is out of production. :)
  4. Fly Tying Topics
    Too tight to buy some new pins for tube flies I thought I would make my own. I used wire from my flying c kit and cut it to size . I turned one end over and put the wire through a small cone head . I then dropped some solder in and built up the head . A little bit of emery work and job done. I...
  5. General Board
    Hi Lads, I have 2 rods available for this coming Friday on Luther/Bridges available due to starting a new job and not having holiday entitlement, Please PM if interested Regards, Hoolet
  6. General Board
    I’m after a new cork handle on one of my 13” 6’ DH rods. Any idea how much I might expect to pay? Any suggests re who might be able to do a really top notch job with flor grade cork? I’ve approached Hardy, the rod manufactures, but would be interested in other options - I imagine Hardy will not...
  7. Off Topic Lounge
    They've made a great job of the River Wharfe bridge repair at Tadcaster. Just after the flood And now..A fantastic job! Tadcaster is of course the home of Sam Smiths brewery and Taddy Bitter Ale
  8. Off Topic Lounge
    Spitting on someone is something I find to be pretty disgusting and degrading never mind doing it to a young lassie, :boxing: he should have been given his p45.. but instead has been suspended by sky and could keep a job
  9. Daiwa
    Anyone got this rod or tried one yet ,or is it just a remake of the Newera new paint job.
  10. Traditional/Fully Dressed Patterns
    This is the Perault version with the red front section. Had a devil of a job mustering enough indian crow of the right size and side. Dx
  11. General Board
    I want to grease my reels. I have pure silicone grease. Anybody used it? Does it do job good.
  12. Spinning
    What are the best inline single hooks to replace the trebles on rapalas. They need to be very strong, for count downs between 7cm and 11cm. They are intended for salmon. I have noted that some hooks are strong enough when they are a large size, but the smaller sizes are nowhere near strong...
  13. General Board
    Does anyone have contact details for an installer in the Ullapool area ? Small tricky job but very important. thanks. M
  14. Classified Wanted
    I have a few spinning rods but they are either 2 pieces or not up for the job,King Salmon in BC,so if you have a 3/4 piece rod gathering dust PM me. Cheers John.
  15. Hunting & Shooting
    Guys. I know b all about guns and shooting. Would a .22 side lever air rifle be sufficient for rat control. Our neighbour has a few and we want to deal with them, preferably without using poison due to cats and other wildlife. We've got an Air Arms 'high power' gun with a 4x40 scope on offer...
  16. General Board
    Does somebody know if Ellen Lawrence is still in business? I wanted some bags and sent her a mail. It was not refused but there's no reply from her to it either. I have ordered a few times from her and she is doing a brilliant job. Icelander05
  17. Vendor Deals
    Exciting opportunities for the right people! TWO new positions have been created in the ever growing team at Angling Active in Stirling. We are looking for: - Full Time Sales Assistant - Full Time Mail / Website Order Operative If you feel you have what it takes to join the Angling Active team...
  18. General Board
    This is an exciting opportunity for passionate anglers looking to mix business with pleasure. We have two vacancies available at Angling Active and we are looking to start meeting people as soon as possible. If you know of someone that might be interested please share this post with them. Please...
1-19 of 21 Results