Yellow white wing BTT sbs

rotenone

Well-known member
Messages
1,622
Reaction score
1,987
1. Line a BTT with 1.6mm plasric tube
2. Select a yellow piece of soft fur
3. Brush it, cut it off and pull out the middle hairs to help form a taper.
4. Tie in with superglued thread wraps.
5. Repeat step 4 with a longer piece of yellow hair, cut off cleanly with a scalpel and add yellow angel hair HD.
6. Make a dubbing rope using a dubbing loop with silver sss dubbing. Wind over the cut fur ends onto the plastic tube, brush a bit.
7. Add a long thin piece of white hair, thats been brushed out.
8. Add silver angel hair
9. Add a short white wing over
10. Select 2 J. C eyes.
11. Heal with germolene skin plaster.
12. Tie in double back the stems.
13. Select a bright yellow Chickabou feather.
14. Wind over super glue
15. Repeat with a white Chickabou an add a micro tungsten turbo, add a drop of glue and pull the tiny cone down hard against the hackle.
16. The finished fly
 

Attachments

  • IMG_20210814_121955_edit_141120176387841.jpg
    IMG_20210814_121955_edit_141120176387841.jpg
    543.9 KB · Views: 41
  • IMG_20210814_122121_edit_141167416444083.jpg
    IMG_20210814_122121_edit_141167416444083.jpg
    752.5 KB · Views: 30
  • IMG_20210814_122250_edit_141248930125842.jpg
    IMG_20210814_122250_edit_141248930125842.jpg
    433.7 KB · Views: 27
  • IMG_20210814_122425_edit_141332702432079.jpg
    IMG_20210814_122425_edit_141332702432079.jpg
    389.5 KB · Views: 26
  • IMG_20210814_122753_edit_141466708495600.jpg
    IMG_20210814_122753_edit_141466708495600.jpg
    757.8 KB · Views: 26
  • IMG_20210814_123455_edit_141650149875260.jpg
    IMG_20210814_123455_edit_141650149875260.jpg
    682.6 KB · Views: 27
  • IMG_20210814_130041_edit_141885696189286.jpg
    IMG_20210814_130041_edit_141885696189286.jpg
    995.1 KB · Views: 30
  • IMG_20210814_130912.jpg
    IMG_20210814_130912.jpg
    1.4 MB · Views: 36
  • IMG_20210814_131113_edit_142104798775711.jpg
    IMG_20210814_131113_edit_142104798775711.jpg
    1 MB · Views: 37
  • IMG_20210814_131515_edit_142206892364758.jpg
    IMG_20210814_131515_edit_142206892364758.jpg
    710.7 KB · Views: 36
  • IMG_20210814_132558.jpg
    IMG_20210814_132558.jpg
    1.4 MB · Views: 35
  • IMG_20210814_132154_edit_142923960078711.jpg
    IMG_20210814_132154_edit_142923960078711.jpg
    1.3 MB · Views: 32
  • IMG_20210814_133357_edit_143089042869311.jpg
    IMG_20210814_133357_edit_143089042869311.jpg
    797.5 KB · Views: 37
  • IMG_20210814_133637_edit_143196863983878.jpg
    IMG_20210814_133637_edit_143196863983878.jpg
    1 MB · Views: 40
Last edited:

Jockiescott

Well-known member
Messages
10,269
Reaction score
5,407
1. Line a BTT with 1.6mm plasric rube
2. Select a yellow piece of soft fur
3. Brush it, cut it off and pull out the middle hairs to help form a taper.
4. Tie in with superglued thread wraps.
5. Repeat step 4 with a longer piece of yellow hair, cut off cleanly with a scalpel and add yellow angel hair HD.
6. Make a dubbing rope using a dubbing loop with silver sss dubbing. Wind over the cut fur ends onto the plastic tube, brush a bit.
7. Add a long thin piece of white hair, thats been brushed out.
8. Add silver angel hair
9. Add a short white wing over
10. Select 2 J. C eyes.
11. Heal with germolene skin plaster.
12. Tie in double back the stems.
13. Select a bright yellow Chickabou feather.
14. Wind over super glue
15. Repeat with a white Chickabou an add a micro tungsten turbo, add a drop of glue and pull the tiny cone down hard against the hackle.
16. The finished fly

Brilliant rotenone!

Thanks for taking the time to post a great SBS! 👍
 

Hardyreels

Administrator
Staff member
Messages
2,205
Reaction score
1,676
Location
Alaska
Thanks!

Like many of your flies displayed this one is worth tying and using and I mean yet this fall.
 

rotenone

Well-known member
Messages
1,622
Reaction score
1,987
1. Line a BTT with 1.6mm plasric tube
2. Select a yellow piece of soft fur
3. Brush it, cut it off and pull out the middle hairs to help form a taper.
4. Tie in with superglued thread wraps.
5. Repeat step 4 with a longer piece of yellow hair, cut off cleanly with a scalpel and add yellow angel hair HD.
6. Make a dubbing rope using a dubbing loop with silver sss dubbing. Wind over the cut fur ends onto the plastic tube, brush a bit.
7. Add a long thin piece of white hair, thats been brushed out.
8. Add silver angel hair
9. Add a short white wing over
10. Select 2 J. C eyes.
11. Heal with germolene skin plaster.
12. Tie in double back the stems.
13. Select a bright yellow Chickabou feather.
14. Wind over super glue
15. Repeat with a white Chickabou an add a micro tungsten turbo, add a drop of glue and pull the tiny cone down hard against the hackle.
16. The finished fly

Thanks!

Like many of your flies displayed this one is worth tying and using and I mean yet this fall.
Its a great fly on bright days but also in the evening, and it very cold clear water unusual colours but i wouldn't ne without a few myself in different sizes
 

Hardyreels

Administrator
Staff member
Messages
2,205
Reaction score
1,676
Location
Alaska
BTW, I have 2 lines for use on that Destination rod, a 600 grain Sacndi is nice for medium flows and I put a 650 grain Ballistic Vector on another reel for low water and no weight flies. The Vector is just a beautiful thing on that rod :)

Light colored flies like this are perfect for fall here because there is a significant amount of deteriorated salmon flesh drifting in the rivers.
 
Top