Rio Scandi Short Versi Tip #7

beaver123

Member
Messages
303
Reaction score
1
Location
Co Fermanagh
Hi, Any one got one of these lines they would like to sell?
Rio Switch 7 also wanted.
I have a Wulff Ambush #8 only use a few times i am willing to sell/swop


thanks
Beaver
 
Last edited:

patchh

Active member
Messages
1,083
Reaction score
11
hi beaver , get yourself an airflow rage shooting head and add your own tips , for a 7wt I would go for a 450-480gr head . I use these lines with rio 10ft-15ft tips and they fly out..........
 

beaver123

Member
Messages
303
Reaction score
1
Location
Co Fermanagh
re lines

Thanks patchh,

I might just do that but i am wary of the rage being too much line for a #7 fast action switch that i am building on a pac bay blank
 

patchh

Active member
Messages
1,083
Reaction score
11
I would,nt think so as I used one on a 10,6 7wt switch rod I had not so long ago..........
 

geordie39

New member
Messages
21
Reaction score
0
Location
Cumbria
geordie39

Hi, Any one got one of these lines they would like to sell?
Rio Switch 7 also wanted.
I have a Wulff Ambush #8 only use a few times i am willing to sell/swop


thanks
Beaver

I have RIO shooting head floater 6/7 36 feet 26 grams
used 6 time (present incorrect weight) £25 free postage Pay Pal
give me call George
 

beaver123

Member
Messages
303
Reaction score
1
Location
Co Fermanagh
Rio Scandi Short Versi Tip

Thanks Guys,
For all your advice on fly lines/heads
took patch's advice, my 450 Rage came today along with the rain.

Life is looking very good at the mo going to test the line tonight
 
Last edited:

patchh

Active member
Messages
1,083
Reaction score
11
hi beaver , let me know how you get on with the rage head , i think you will be plesantly surprised how good they are............patchh
 

beaver123

Member
Messages
303
Reaction score
1
Location
Co Fermanagh
rage 450

Hi, patchh
The jury is still out on the rage 450 I think that it is a bit too heavy for the #7 + the rear head loop is catching in my rod rings.

I will need to continue testing if the head is the correct weight for me I will cut the loop of the rear of the head and affix a smaller loop

I only wish that i had some lighter lines to try.

might need some casting lessons:confused:
 

patchh

Active member
Messages
1,083
Reaction score
11
hi beaver , i am surprised you find the 450 head heavy , thats the line i used on my 7 wt switch rod........if you don,t get on with it let me know and i will buy it from you.............regards derek
 
Top