- One of these days
- Pictures of my second build
- Repairing cracks in carbon rods
- re ringing a rod
- Rod blank sources
- Rod Ring Types
- extension
- Which blank?
- Blank for the ultimate Dapping rod?
- balancing a rod
- Cane rods
- LORHIC Blanks
- Turning Cork
- lined rings on a spey rod
- Fitting a new handle to a factory rod?
- Broken rods
- Sticky Spigot Problem
- This section is great source of information and advice
- Where to start
- LORHIC blanks to go....
- Twisting Rod Handle - Cures
- Matt Finish
- Refurbishment.
- replacement cork filler
- Le Cie reel seats
- Stripping Guides
- Rod Building Book
- Busted butt
- salmon fly rod reel placements
- which blank?
- salmon fly rod blanks
- help needed for building salmon fly rod
- Decent Pre-made rod handles in the UK?
- Hypalon grips.
- Gorilla Glue, which one?
- New Rod Complete - CTS AP 15'6"
- Virgin builder needs masters advice
- Replacing Shakespeare Oracle Handle
- My new build on a CTS 15' blank
- Carbotec Blanks
- Help with a first attempt
- Replacing a tip ring
- Disintegrating Handle
- Cork Sellers
- Can anyone recommend a UK builder?
- removing varnish
- Varnish
- The ultimate prawn/shrimp fishing blank.
- Spinning blanks
- Help with repair
- fixing cork
- Fly retainer above handle
- Sage DH blanks
- Composite Grip
- Feather Inserts
- rod building
- Broken eye
- Split cane rod help needed
- Rewhipping eyes
- Loomis blanks
- Repair or not?
- fly rod blank
- Converting a Fly rod to a Spinner
- Rod Refurb
- Ceramic insert lost
- Daianuru Rod Blanks?
- Reel seat arbour
- SWFFing rod guides
- Bloke Saltwater reel seat
- Rod rings
- Enigma Refurb Complete
- rod repair
- good websites
- advice needed
- 10ft rapala rod required
- i am interested in learning how to make rods as a job
- burnt cork
- Reel Seat
- Scott ARC
- renovation
- Hardy Swift MKII Screw Reel Seat
- Rod Ring Help
- Spinning Rod Blanks
- fly rod blanks for bait fishing
- Rod Refurbishing
- Faughan Valley Rod tip section
- adjustable reel seat
- Varnishing rods
- wanted
- Finding the spine
- Gloomis Blank Wanted
- cheap blank wanted
- can you get rod extensions
- Rod Personalisation, what do you choose?
- Changing Rod Butt
- trout rods
- Composite cork butts?
- Sage 8# 11 foot switch rod
- Cheapest retailer for recoil's?
- Repair advice
- Single leg or snakes?
- what you think
- Touching up chipped Rod varnish
- rod builder??
- Varnish question
- daiwa whisker top section ???
- daiwa whisker
- CTS Blank 15ft
- Another varnish question
- Before and After, rod Handle
- Angled Inserts
- Broken Tip Section
- Ideas for worming next summer, grisle centrepin rod.
- Sage Z axis 15" Spey Rod
- Flex coat
- Titanium reel seat(s)
- Broken Tip Section Greys grxi 14'
- changing rod handle
- Out of interest
- Reel seat
- Cork Handles
- His & Hers - Matched Pair
- Imported switch blank
- A bit less bling!
- CTS Affinity DQ 13ft #8/9 4 piece
- Rod tubes
- reshaping cork handle
- Sage TCX 8119-4 Custom Build
- Guideline 10ft #8 extension butt
- Interested
- New Handle
- Replacing end ring ?
- Split Cane ?
- How does one paint a blank?
- Whipping
- guids and reel seat
- Re Builds
- Epoxy Problem
- Harrison Blanks
- Blank Actions
- LAX A Rods
- my first build
- Worn male ferrule
- what size eyes for 13ft7in rod??
- Batson Rainshadow Switch 10 ft8 ins 8wt.
- Rod dryer
- St Croix Legend Elite
- Finish
- Reel seats
- Help repair a Bruce and Walker Hexagraph
- Imported rod kit - UK builder
- At Last
- Fly Rod Building Made Easy
- 15' Lorhic
- Composite, Rubberized Burl Cork Handles
- Help Building a 15' Bloke rod
- varnish lifting
- 60th Birthday gift for my dad
- new handle
- Making a handle thinner
- New rod rings
- Loose handle
- My first build 14' Bloke 50XL Blank
- Need to replace guides after one short season.
- replacing a ring
- Calling all rod builders?
- Tip Ring advice needed on how remove residue
- Polishing out minor scratches on epoxy
- Rod whipping thread
- giudeline lxpe ring
- Harrison lorhic 15ft salmon 3 piece. # 10/11
- Rod Building Essential equipment
- LPXe varnish crack
- Revamp
- 1st Build.
- Replacing reel seat
- Question about rod handle
- Replacing broken sage section
- Agglomerated cork
- Split Cane - 1st build
- Anglers roost
- RodDancer Threadmaster "ONE" finish
- Bob Meiser blanks
- Switch blanks
- Bruce and Walker
- New Rod Build
- rubberised butt
- Taking the plunge...
- Spine question
- Custom Rod Bag - here.
- Rod repair excellent
- David Norwich EV5
- Help please
- Paul Young Midge
- Which oil for cork grips
- Guides for SH rod
- rod guide from hell
- Reel seat spinning.
- Bucktailbob clear your inbox
- Rod handle
- Scierra HMS vII 14'8' 9/10
- loop green whipping thread
- Urge to build!!!!
- Replacing cork veneer with solid cork?
- Gonna give it a go. Advice needed.
- putting jungle cock on a rod
- New lease of life.
- Tom Morgan - Rod Building Article
- acid Rod
- Who on here builds rods?
- Rod Bits
- Looking for 15ft 10/11 Salmon Fly Rod Blank
- Crack in female joint
- hoping someone can help
- Rod building advice
- Zspey handles
- Allcocks lucky strike split cane
- WTB Pacbay Quickline Switch #7 4 piece Blank
- Help! Looking for a 12 ft switch rod blank
- Which blank
- UV cured resin for rod repair
- Benwood 8'2 Parabolic
- First Spey Rod Build
- Very stupid question
- Thread colour for Sage XP
- Aglommerated cork handles- Yay or Nay?
- Rod rings for a 13ft 8wt
- 10' big boy
- Power Fibres
- rod blanks source uk
- qestion for all you rod builders out there
- Building a rod
- dull blank
- Building my first ever rods.
- Bruce and Walker
- Hook Keeper for fly rod WTD
- Repair of varnish scratch mark
- 13 footer
- Cts Skagit 15.0 9-10
- source for 12 or 13ft blank
- Casting stick from flyrod blank?
- Tom Moran
- CTS blanks
- Weights in butt of rod
- sage z axis blank 10ft 7 wt
- Shortening a spinning rod cork handle?
- Bamboo Twins.
- A Fast Epic Build!! (Trout not Salmon)
- blotching on thread
- rod handle, a necessity?